Advertisement
F
IRES OF
Check the fit of the shelf onto the top of
the beam and bracket, then remove.
Adjust bracket if necessary. Apply a thin
bead of cement along the top edge of the
legs, against the back edges of the shelf,
and along the inside edge where the
shelf comes into contact with the hori-
zontal
piece
from
Carefully lower the shelf into position
onto the beam. Use a small wood shim in
the joint between the beam and legs if
necessary to insure that the top surface
of the shelf is level.
T
I
I
RADITION
NSTALL
the
slip
system.
Step #15
P
S
NSTRUCTIONS FOR
OLANO
Step #14
Don't forget to apply a small amount of
cement in the holes when the shims are
removed.
cement off mantel along the joints with
a wet cloth. Any marks that have
occured on the surface of the mantel can
be cleaned off very easily using the
white eraser provided. If the mantel is
chipped at any point, it can be touched
up with the two piece touchup provided
(see care and maintenance).
16
11
AGE
OF
M
#4012
ANTEL
Carefully
wipe
all
excess
Advertisement
