Setting The Password - Panasonic KX-TGP600G Operating Instructions Manual

2.8 Setting the Password

For details about the setting, see System Settings, page 161.
The administrator password may be required for this setting. Contact your
*1
administrator for further information. For available characters, see "10.1.2 Character
Table for Administrator Password", page 146.
2.8 Setting the Password
The handset/desk phone password is not set by default. You must register a handset/
desk phone password (4 digits) before use. You cannot use the following features
without setting a password:
• Phonebook lock (See 7.2.6 Locking the Handset Phonebook, page 114).
• "Manual&Password" or "Auto&Password" for "Key Lock Type" (See Key Option, page
151).
• Reset Handset (See Other Option, page 158).
Note
• To avoid unauthorized access to this product:
–Set a password that is random and cannot be easily guessed.
–Change the password regularly.
• Make a note of the password so that you will not forget it.
To set
[In standby mode]
1. /
MENU
2. KX-TPA60/KX-TPA65:
[ ]/[ ]/[ ]/[ ]:
KX-TPA68:
[ ]/[ ]: "Setting Handset"
3. [ ]/[ ]: "Other Option"
4. [ ]/[ ]: "Change Password"
5. Enter a new password (4 digits [0–9]).
6. Verify the password by entering it again as in step 5.
The administrator password may be required for this setting. Contact your
*1
administrator for further information. For available characters, see "10.1.2 Character
Table for Administrator Password", page 146.
80
/
OK
OK
OK
*1
OK