Battery Installation; Attaching The Belt Clip - Panasonic KX-TGP600G Operating Instructions Manual

9.2.1 Battery Installation

• The initial setting for the KX-TGP600 IP address is "DHCP—Auto". For information
about your network environment, contact your administrator. For details, see Network
Settings, page 160.
Charger for KX-TPA60
Connect the AC adaptor to the charger.
• The AC adaptor should be connected to a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become disconnected.
• Fasten the AC adaptor cord to the cord holder.
• Use only the included Panasonic AC adaptor.
9.2.1 Battery Installation
Open the battery cover, insert the batteries, and close the cover as indicated below.

9.2.2 Attaching the Belt Clip

You can attach the handset to your belt by following the steps below.
1. Push the clip onto the back of the handset.
2. Insert the clip into the designated notches in the handset.
132
PNLV226xx