Getting Started; Setting Up - Panasonic KX-TGMA44 Installation Manual

Setting up

Connections/Wall mounting
Connect the AC adaptor to the unit by pressing the plug firmly.
Fasten the cord by hooking it.
Connect the AC adaptor to the power outlet.
Drive the screws ( 1 ) (not supplied) into the wall, if necessary.
2 25 mm (1 inches)
Note:
R The AC adaptor comes connected to the charger at the time of
shipment.
R The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
R Make sure that the wall and the fixing method are strong enough to
support the weight of the unit.
Battery charging
Important:
R 2 rechargeable Ni-MH batteries are installed in the handset at the time
of shipment.
R Before initial use: Remove the yellow insulation sheet before using
the handset.
For assistance, please visit http://shop.panasonic.com/support
TGMA44_45(en)_0606_ver101.pdf 7
2
4
1

Getting Started

1
3
2
7
2016/06/06 16:11:27