Panasonic KX-TGP600G Operating Instructions Manual page 161

10.1.4 System Setting Menu Layout (when connected to the KX-TGP600)
Sub Item
VLAN
Link Speed
Embedded
Web *1
Network Test
Not displayed when connected to a base unit other than the KX-TGP600.
*1
System Settings
The administrator password may be required for this setting. Contact your administrator
for further information. For available characters, see 10.1.2 Character Table for
Administrator Password, page 146
Sub Item
Register H/S
Cancel Register
Change Base
PIN
Description
Specifies the VLAN
settings.
Specifies the Ethernet
PHY mode settings.
Selects whether the web
function and the logging
function are available or
not.
Specifies an IP address
to ping.
Description
Registers the handset/
desk phone selected
from the list to the base
unit currently connected.
Cancels the handset/
desk phone registration
between the handset/
desk phone and the base
unit.
Changes the PIN (4
digits) of the base unit.
Setting
Enable VLAN
Yes
No
VLAN ID: 0–4094
VLAN Priority: 0–7
Auto
100M/Full
100M/Half
10M/Full
10M/Half
On
Off
IP address (IPv4)
Setting
Select the handset/
desk phone.
Select the handset/
desk phone.
Enter PIN
Enter New PIN
Verify New PIN
Default
Enable
VLAN: No
VLAN ID: 2
VLAN
Priority: 7
Auto
Off
Not stored
Default
—
—
1234
161