Setting Passcode - Pliant Crewcom 2400 Operating Manual

3. Navigate to the appropriate menu in the device, select the setting you wish to change, and enter the system
passcode one time to access that particular setting. (In this case, the device will revert back to its "locked"
state when you exit the menu or when the temporary access times out.)
Set System Access Level from Master Control Unit
See the Control Unit Manual
Set System Access Level from CrewWare
See the CrewWare Manual

Setting Passcode

Set Passcode from Master Control Unit
See the Control Unit Manual
Set Passcode from CrewWare
See the CrewWare Manual
for more information about this process.
for more information about this process.
for more information about this process.
for more information about this process.
Operation - 49