Adjusting Mic Gain - Pliant Crewcom 2400 Operating Manual

Adjusting Mic Gain

When the Mic Gain is set too high, it is possible to induce feedback or echo. When set too low, words can be clipped
by the low level noise gate, or may sound too quiet to other listeners. Different models of headsets will require widely
varying mic gain settings.
1. Press and hold the RP Menu button for 2 seconds; then, use the far-right volume knob to scroll and select User
Settings . Press F2 ( ENT ).
2. Scroll and select Mic Gain . Press F2 ( ENT ).
3. Scroll and select either Dynamic Gain or Electret Gain . The current mic gain setting will be displayed on the
right-hand side. Press F2 ( ENT ) to view a list of available setting options.
4. Use the far-right volume knob to increase or decrease the Mic Gain level. For dynamic microphones, select
from within a range of +6 to +35 dB. For electret microphones, select from within a range of -12 to +17 dB.
5. Press F2 ( SAVE ). Once saved, the screen will return to the previous menu.
Figure 21 Adjusting Mic Gain
Operation - 39