Thank You; Model Information - Pliant Crewcom 2400 Operating Manual

THANK YOU

® ®
We at Pliant Technologies want to thank you for purchasing CrewCom . Pliant brings our experience, expertise,
and commitment to quality technology with the new CrewCom System. In order to get the most out of your new
CrewCom product, please take a few moments to read this manual completely so that you better understand the
operation of this product. For questions not addressed in this manual, feel free to review the additional support
documentation provided on our website or to contact Pliant's Customer Support Department:
Pliant Technologies, LLC
205 Technology Parkway Auburn, AL 36830 USA
www.plianttechnologies.com
Phone: +1.334.321.1160
Toll-Free: 1.844.475.4268 or 1.844.4PLIANT
Fax: +1.334.321.1162
® ® ™
Copyright © 2018–2020 Pliant Technologies, LLC. All rights reserved. The Pliant , CrewCom , and CrewNet word
marks and the Pliant "P" logo are trademarks of Pliant Technologies, LLC. Any and all other trademark references
within this document are property of their respective owners.
While Pliant makes every attempt to maintain the accuracy of the information contained in this manual, this
information is subject to change without notice, and published device/system functions and features are subject to
firmware version. Please check our website for the latest system specifications and certifications.

Model Information

This document applies to models CRP-44-900, CRP-44-900AN, CRP-22-900, CRP-22-900AN, CRP-44-2400, CRP-44-
2400CE, CRP-22-2400, and CRP-22-2400CE.
CRP-22-900 and CRP-44-900 models are only available in North America and operate within the 902–928 MHz
frequency range.
CRP-22-900AN and CRP-44-900AN (Oceania) models are approved for use in Australia and New Zealand and operate
within the 915–928 MHz frequency range.
CRP-44-2400CE and CRP-22-2400CE models meet the same specifications as the CRP-44-2400 and CRP-22-2400
models, and they comply with ETSI standards (300.328 v1.8.1). Non-CE models are non-compliant with some ETSI
standards.
Document Reference: 2020.04 D0000215_E
Thank You - iii