Pliant Crewcom 2400 Operating Manual page 19

User Settings – A user setting is one that is classified as being adjustable by the Radio Pack user and is
l
limited to local device settings that do not alter the CrewCom Configuration File. The Profile can be used to
determine these settings, but they can also be customized directly from a Radio Pack (after a Profile is
loaded), via the Control Unit's menu, or via CrewWare.
RP Profile Settings
A list of the specific functions within each setting type is provided in the table below.
Profile Management Settings
Global Profile Description
Settings
Profile Name Name assigned to the Profile
Radio Which Radio Transceiver each Radio Pack can log into and function with
Transceiver
Scan List
Conference Which Conferences are assigned to Volume knobs and corresponding Talk buttons
Assignments
ISO Enables selection of specific Profiles to include in a Conference ISO. This function is either Enabled
or Disabled. (ISO must also be enabled for the Conference.)
Function Functions such as Stage Announce, Call, or Relays are assigned to the Pack's F1 or F2 button
Buttons
Button Mode Determines the talk button behavior as either "Latch," "Momentary," "Disabled," or "Always On."
User Settings Description
Sidetone Level adjustments
Mic Gain Level adjustments (for Dynamic and Electret mics)
Noise Gate Level adjustments
Min/Max Volume Level adjustments
Talk Tones Enabled or Disabled
LCD Contrast Level adjustments
LCD Brightness Level adjustments
LCD Timeout Disabled, 3, 10, or 30 seconds
Battery Alert Audible, Vibrate, Both, or Off
Mic Type Auto-Detect, Dynamic, or Electret
For more information about managing user coverage and the CrewCom scan list, see Managing User Coverage.
Introduction - 12