Yamaha PM4000 Operating Manual page 50

INPUT CHARACTERlSTlCS
PAD
Connection
0
CH IN 30
1 ~ [ch (*1)
ST CH IN 1 ~ 4ch
0
30
SUB IN
GROUP (1 ~ 8)
STEREO (L, R)
AUX (1 ~ 8)
AUX ST1, 2 (L, R)
CUE (L, R)
MTRIX (1 ~ 8)
-50
TALKBACK IN
+4
INSERT IN
CH 1 ~ [ch (*1)
1 ~ 4ch
ST CH
GROUP (1 ~ 8)
STEREO (L, R)
AUX (1 ~ 8)
AUX ST1, 2 (L, R)
MTRIX (1 ~ 8)
2TR IN 1, 2 (L, R)
NOTES: *1 PM4000 -24: 24 ch, -32: 32 ch, -40C: 40 ch, -48C: 48 ch
*2 All XLR connectors are electronically balanced. Phone jacks are balanced with Tip = signal high (+), Ring = signal low (-), and Sleeve = ground.
*3 In these specifications, when dB represents a specific voltage. 0 dB is referenced to 0.775 Vrms.
*4 Sensitivity is the lowest level that will produce an output of +4 dB (1.23 V), or the nominal output level when the unit is set to maximum level.
OUTPUT CHARACTERISTICS
Connection
GROUP OUT (1 ~ 8)
STEREO OUT (L, R)
MTRIX OUT (1 ~ 8)
AUX OUT (1 ~ 8)
AUX ST1, 2 OUT (L, R)
TALKBACK OUT
OSC OUT
1 ~ [ch (*1)
CH DIRECT OUT
1 ~ [ch (*1)
CH INSERT OUT
ST CH INSERT OUT 1 ~ 4ch
GROUP INSERT OUT (1 ~ 8)
STEREO INSERT OUT (L, R)
MTRIX INSERT OUT (1 ~ 8)
AUX INSERT OUT (1 ~ 8)
AUX ST1, 2 INSERT OUT (L, R)
PHONES OUT 1, 2 (L, R)
NOTES: *1 PM4000 -24: 24 ch, -32: 32 ch, -40C: 40 ch, -48C: 48 ch
*2 All XLR connectors are electronically balanced. Phone jacks are balanced with Tip = signal high (+), Ring = signal low (-), and Sleeve = ground.
Phone Jacks (STEREO) are unblanced.
*3 In these specications, when dB represents a specific voltage. 0 dB is referenced to 0.775 Vrms.
Gain
For use with
Actual load
Trim
Impedance Nominal
~
-70
mics
and
-20
lines
lines
50 ~
mics
lines
lines
lines
Actual source For use with
Impedance Nominal
150 600 lines
150 600 lines
lines
Phones
Phones
Page 3-3
Input level (*3)
Sensitivity (*4) Nominal
-90 dB (0.025 mV) -70 dB (0.25 mV) -48 dB 3.09 mV)
-60 dB (0.775 mV) -40 dB (7.75 mV) -18 dB (97.6 mV)
-40 dB (7.75 mV) -20 dB (77.5 mV) +2 dB (0.976 V)
-10 dB (245 mV) +10 dB (2.45 V) +32 dB (30.9 V)
-6 dB (388 mV) +4 dB (1.23 V)
+4 dB (1.23 V)
-70 dB (0.25 mV) -50 dB (2.45 mV) -28 dB (30.3 mV)
-16 dB (123 mV) +4 dB (1.23 V)
-16 dB (123 mV)
+4 dB (1.23 V)
-6 dB (388 mV)
+4 dB (1.23 V)
-6 dB (388 mV) +4 dB (1.23 V)
Output level (*3)
Nominal Max before Clip
+4 dB (1.23 V) +24 dB (12.3 V)
+4 dB (1.23 V) +24 dB (12.3 V)
+4 dB (1.23 V) +24 dB (12.3 V)
75 mW 150 mW
65 mW 150 mW
Connector
Max before Clip In Mixer (*2)
XLR-3-31 type
+26 dB (15.5 V) XLR-3-31 type
XLR-3-31 type
+26 dB (15.5 V)
Phone Jack
+26 dB (15.5 V)
(TRS)
+26 dB (15.5 V) XLR-3-31 type
Connector
In Mixer (*2)
XLR-3-32 type
Phone Jack (TRS)
Phone Jack (TRS)
Phone Jack (STEREO)