Stereo Input Channel Stereo - Yamaha PM4000 Operating Manual

6.10 Stereo Input Channel Stereo Aux
Sends 1 & 2: L+R Blend or Stereo
Pairs
A slide switch in each stereo input module changes
the signal source for the two stereo aux sends (without
regard to pre or post status). As shipped, the two Stereo
Figure 6-10. Internal Switch Position For Stereo Input Module ST Aux Send 1 & 2 Mono combine
or Stereo Paired Signal Sourcing, and Corresponding Location on Block Diagram.
Aux Sends each carry discrete left and right signals
from the channel input. Moving the switch changes the
signal take-off points so that the L and R sides of each
stereo Aux Send both carry the same mono L+R com-
bined signal (i.e, while the level applied to the L & R
aux busses can be varied, the signal itself is the same).
See Figure 6-10.
Page 6-11