Program Change On/Off; Control Change On/Off - Yamaha N-100 Owner's Manual

MIDI Functions

Program Change ON/OFF

Normally the N-100 will respond to MIDI program change numbers received from an external key-
board or other MIDI device, causing the same numbered voice to be selected on the corresponding
channel (the keyboard voice does not change). The N-100 will normally also send a MIDI program
change number whenever one of its voices is selected, causing the same numbered voice or pro-
gram to be selected on the external MIDI device if the device is set up to receive and respond to
MIDI program change numbers. This function makes it possible to cancel program change number
reception and transmission so that voices can be selected on the N-100 without affecting the exter-
nal MIDI device.
While holding down the
key. Pressing the C#6 key repeatedly toggles between Program Change On and
Off.

Control Change ON/OFF

Normally the N-100 will respond to MIDI control change data received from an external MIDI
device or keyboard, causing the voice on the corresponding channel to be affected by pedal and
other "control" settings received from the controlling device (the keyboard voice is not affected).
The N-100 also transmits MIDI control change information when the pedal or other appropriate
controls are operated.
This function makes it possible to cancel control change data reception and transmission so that,
for example, the N-100's pedal and other controls can be operated without affecting an external
MIDI device.
While holding down the [DEMO] and [PIANO/VOICE] buttons, press the D6
key. Pressing the D6 key repeatedly toggles between Control Change On and
Off.
24
N-100 Owner's Manual
and
[DEMO] [PIANO/VOICE]
C#6
D6
buttons, press the C#6
C7
C7
NOTE
For information on program
change numbers for each of the
N-100's voices, refer to MIDI Data
Format on page 33.
Default setting: ON
NOTE
For information on control
changes that can be used with
the N-100, refer to MIDI Data For-
mat on page 33.
Default setting: ON