Midi Functions; Midi Transmit/Receive Channel Selection; Local Control On/Off - Yamaha N-100 Owner's Manual

MIDI Functions

These operations let you make detailed adjustments to MIDI settings.
MIDI Transmit/Receive Channel
Selection
In any MIDI control setup, the MIDI channels of the transmitting and
receiving devices must be matched for proper data transfer.
This parameter enables you to specify the channel on which the N-100
transmits or receives MIDI data.
Setting the Transmit Channel
While holding down the
C1–E2 keys.
Setting the Receive Channel
While holding down the
C4–F5 keys.

Local Control ON/OFF

"Local Control" refers to the fact that, normally, the N-100 keyboard controls its internal tone gen-
erator, allowing the internal voices to be played directly from the keyboard. This situation is "Local
Control On," since the internal tone generator is controlled locally by its own keyboard.
Local control can be turned OFF, however, so that the N-100 keyboard does not play the internal
voices, but the appropriate MIDI information is still transmitted via the MIDI OUT terminal when
notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI
information received via the MIDI IN terminal.
While holding down the
key. Pressing the C6 key repeatedly toggles between Local Control On and Off.
and
[DEMO] [PIANO/VOICE]
and
[DEMO] [PIANO/VOICE]
E2
C0 C1
2 4 7 9 11 14 16
1 3 5 6 8 10 12 13 15 OFF
Transmit Channel
(C1–E2)
and
[DEMO] [PIANO/VOICE]
C6
buttons, press one of the
buttons, press one of the
F5
C4
2 4 7 9 11 14 16
1 3 5 6 8 10 12 13 15 1+2 ALL
Receive Channel
(C4–F5)
buttons, press the C6
C7
MIDI Functions
NOTE
In Dual, Voice 1 data is transmit-
ted on its specified channel and
Voice 2 data is transmitted on the
next greater channel number rela-
tive to the specified channel. In
this case, no data is transmitted if
the transmit channel is set to
"OFF."
ALL:
"Multi-timbre" Receive. This
allows simultaneous reception of
different parts on all 16 MIDI
channels, enabling the N-100 to
play multi-channel song data
received from a music computer
or sequencer.
1+2:
"1+2" Receive. This allows simul-
taneous reception on channels 1
and 2 only, enabling the N-100 to
play 1 and 2 channel song data
received from a music computer
or sequencer.
Program change and other like
channel messages received will
not affect the N-100's panel set-
tings or the notes you play on the
keyboard.
Data for the demo song and 50
piano preset songs cannot be
transmitted via MIDI.
Default setting: ON
N-100 Owner's Manual
23