Troubleshooting; Optional Equipment - Yamaha N-100 Owner's Manual

Troubleshooting

Problem
The N-100 does not turn on.
Noise is heard from the speakers or head-
phones.
The overall volume is low, or no sound is
heard.
The damper pedal has no effect, or the
sound continuously sustains even when the
damper pedal is not pressed.

Optional Equipment

Headphones (HPE-30)
Possible Cause and Solution
The N-100 has not been plugged in properly. Securely insert the female plug into the
socket on the N-100, and the male plug into a proper AC outlet (page 11).
The noise may be due to interference caused by the use of a mobile phone in close
proximity to the N-100. Turn off the mobile phone, or use it further away from the N-
100.
• The Master Volume is set too low; set it to an appropriate level using the [MASTER
VOLUME] dial.
• Make sure a pair of headphones is not connected to the headphones jack
(page 12).
• Make sure that Local Control (page 23) is ON.
The pedal cord may not be properly connected. Make sure to securely insert the
pedal cord into the [PEDAL] connector (page 30).
Troubleshooting / Optional Equipment
N-100 Owner's Manual
25