Yamaha DME4io-ES Owner's Manual page 41

References
Hum&Noise
<DME8i-ES>
Input Output
INPUT 1–8 OUTPUT 1–8
<DME8o-ES>
Input Output
INPUT 1–8 OUTPUT 1–8
<DME4io-ES>
Input Output
INPUT 1–4 OUTPUT 1–4
* Hum & Noise are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave
attenuation.
Dynamic Range
<DME8i-ES/DME8o-ES>
Input Output
INPUT 1–8 OUTPUT 1–8
<DME4io-ES>
Input Output
INPUT 1–4 OUTPUT 1–4
* Dynamic range are measured with a 6dB/octave filter @12.7kHz; equivalent to a 20kHz filter with infinite dB/octave
attenuation.
Crosstalk@1kHz
<DME8i-ES/DME8o-ES>
from
INPUT N OUTPUT (N–1) or (N+1)
<DME4io-ES>
from
INPUT N OUTPUT (N–1) or (N+1)
* Crosstalk is measured with a 18dB/octave filter @80kHz
fs=48kHz or 96kHz, EIN=Equivalent Input Noise
RL
Rs=150Ω, GAIN: –60dB
All input & output level controls: 0dB
600Ω
Rs=150Ω, GAIN: +10dB
All input & output level controls: 0dB
RL
Rs=150Ω, GAIN: +10dB
600Ω
All input & output level controls: 0dB
RL
Rs=150Ω, GAIN: –60dB
All input & output level controls: 0dB
600Ω
Rs=150Ω, GAIN: +10dB
All input & output level controls: 0dB
fs=48kHz or 96kHz
RL
600Ω
RL
600Ω
reference to the level of output N
to
N = 1–8, GAIN: +10dB
to
N = 1–4, GAIN: +10dB
CONDITIONS
CONDITIONS
CONDITIONS
CONDITIONS
GAIN: +10dB
CONDITIONS
GAIN: +10dB
CONDITIONS
CONDITIONS
DME8i-ES/DME8o-ES/DME4io-ES Owner's Manual
MIN TYP MAX UNITS
–128 –127
dBu
EIN EIN
–64 dBu
–82 –79 dBu
MIN TYP MAX UNITS
–82 –79 dBu
MIN TYP MAX UNITS
–128 –127 dBu
EIN EIN
–64 dBu
–82 –79 dBu
MIN TYP MAX UNITS
106 dB
MIN TYP MAX UNITS
106 dB
MIN TYP MAX UNITS
–80 dB
MIN TYP MAX UNITS
–80 dB
41