Remove Front Panel And Chassis - Friedrich CCW06B10A Operating Instructions Manual

REMOVE FRONT PANEL AND CHASSIS

1. Pull down the front panel and remove the filter.
2. Lift the front panel upwards to remove and place
to the side.
3. Locate the two faceplate screws and remove.
These screws will need to be re-installed prior
to mounting the air conditioner.
4. After removing the screws, gently pull away the
faceplate from the air conditioner cabinet.
5. Remove the control panel screw and WI-FI module
screw (if available) from the front panel.
6.Remove the screws from the cabinet.
7. Hold the cabinet while pulling on the base
handle to carefully remove the unit. Do not pull
or lift near the top of the unit.
5
Do not pull or lift
this area. It may
cause damage.
Pull the base handle.