Table of Contents
Advertisement
ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER' S MANUAL ARE THE PRESENTATION
OF THE MANUFACTURE. PLEASE READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY.
Window preparation
1. This air conditioner is designed to be installed
In a standard double-hung window with a window
width between 23" and 36" (660mm-914mm).
2. The air conditioner can be installed without the
accordion panels fit in a narrow window opening.
3. The lower sash ( the lower part of the window that
moves up and down) must allow for 16" of vertical
clearance when open.
4. All supporting parts must be secured to firm wood,
masonry, or metal.
5. The electrical outlet must be within reach of the
power cord.
Air conditioner
Bottom channel
STOOL
OFFSET
SILL
INTERIOR
WALL
How to Install
NOTE:This is necessary for proper condensed water
utilization and drainage. If you are not using the Side
Panels for any reason, this pitch to the rear muse be
maintained!
Remove the air conditioner from the box and place on a
hard flat surface, as floor, a bench or a table. There is a
Left and Right Window Filler Panel - be sure to use the
proper panel for each side. When installed the flange for
securing the panel in place to the window sill will be facing
into the room.
4
23" to 36"
660mm to 914mm
16"
406mm
EXTERIOR
WALL
Hide quick links:
Advertisement
Table of Contents
