Advertisement
Problem
The appliance
produces a
pumping sound/
the handle
vibrates.
Steam and water
leak around
Decalc door,
steam trigger and
gripping area.
Steam gets
weaker over time
Steam leaves
stains on the
garment or
impurities
come out of the
steamer head
78
Possible cause
The steamer head is
placed horizontally for
a long time.
Water is pumped to
the steamer head to be
converted into steam.
The water level in the
water tank is too low.
Decalc inlet stopper is
not inserted properly.
Water tank filling door
is not closed properly
Scales/calc are formed
inside the appliance.
Scales/calc are formed
inside the appliance.
Solution
Place the appliance in
an upright position on
a flat surface after each
usage.
This is normal.
Unplug the appliance
and refill the water
tank.
Open the Decalc door
and push in the Decalc
inlet stopper. Close the
Decalc door.
If this persists, please
stop using the
appliance. Contact
an authorized Philips
service centre.
Press down the filling
door.
Perform Decalc
function (refer to
section).
Perform Decalc
function (refer to
section).
Advertisement
