Advertisement
EN
Problem
The appliance
does not heat
up.
The appliance
does not
produce any
steam.
Water droplets
drip from the
appliance
steamer head.
Possible cause
The appliance is not
plugged in properly or
not switched on.
The appliance is not
plugged in properly or
not switched on.
The appliance has not
heated up sufficiently.
You have not pressed
the steam trigger fully.
The water level in the
water tank is too low.
Scales/calc are formed
inside the appliance.
Solution
Check if the mains plug
is inserted properly
and its wall socket is
working.
Check if the appliance
is switched on.
Check if the mains plug
is inserted properly
and its wall socket is
working.
Check if the appliance
is switched on.
Let the appliance heat
up for 60 seconds
('steam-ready' light
flashes). When the
appliance is ready for
use, the light turns
steady.
Press the steam trigger
fully for a few seconds.
Unplug the appliance
and refill the water
tank.
Perform Decalc
function (refer to
section).
77
Advertisement
