Heatilator NDV30-IFT Installation Manual page 63

A. Vent Components Diagrams (continued)
EFFECTIVE LENGTH
32 IN. (813 mm) MIN.
35 IN. (889 mm) MAX.
PVI-SLP-B
Power Vent Inline
Note: Wire harnesses required to power the PVI-SLP-B connect to the appliance and are ordered separately from
PVI-SLP-B. Contact your dealer to order.
Note: The PVI-SLP-B requires one of the following options to be installed on this appliance.
Option A: IFT-RC400 and/or IFT-WFM, IFT-ACM and IntelliFire App that can be downloaded from the app store.
OR
Option B: IFT-RC150, IFT-ACM, IFT-WFM and an IntelliFire App that can be downloaded from the app store. These
accessories are purchased separately from the PVI-SLP-B. Contact your dealer to order.
12-1/2 IN.
(318 mm)
Figure 12.7 PVI-SLP-B Vent Components
Heatilator • NDV30-IFT, NDV33-IFT, NDV36-IFT, NDV36-IFT-NVR, NDV42-IFT Installation Manual • 2620-980 Rev. C • 8/20
13-5/8 IN.
346 mm
12-1/2 IN.
318 mm
20-3/4 IN.
527 mm
16 IN.
406 mm
4-1/2 IN.
114 mm
9-3/16 IN.
(233 mm)
13-5/8 IN.
(346 mm)
SLP-LPC
SLP Low Profile Cap
(Approved for use with PVI-SLP-B only)
Optional Wire Harness
DESCRIPTION
10 FT PV Wire Harness
20 FT PV Wire Harness
40 FT PV Wire Harness
60 FT PV Wire Harness
80 FT PV Wire Harness
100 FT PV Wire Harness
15 IN.
(381 mm)
16-11/16 IN.
424 mm
PART NUMBER
PVI-WH10
PVI-WH20
PVI-WH40
PVI-WH60
PVI-WH80
PVI-WH100
16-11/16 IN.
(424 mm)
63