Install The Log Assembly - Heatilator NDV30-IFT Installation Manual

G. Install the Log Assembly
Log Set Assembly:
SRV2380-070
Models:
NDV30-IFT, NDV30L-IFT, NDV33-IFT, NDV33L-IFT, NDV36-IFT-NVR,
NDV36-IFT, NDV36L-IFT, NDV42-IFT, NDV42L-IFT NBV30-IFT, NBV33-IFT, NBV36-IFT,
NBV42-IFT
See Table 1 for corresponding log set and individual logs for each size Novus model.
SIZE
ASSEMBLY
LOG 1
LOG 2
LOG 3
LOG 4
LOG 5
Table 1.
CAUTION: Logs are fragile, handle with care.
The log set is shipped from the factory with three logs already in place on the hearth pan. See Figure 1. In case of damage,
the log will need to be removed from the base pan. See Figure 2 for locations of fasteners for each log.
2 2
Figure 1. Log Set Shown as Shipped
FLAT SPOTS FOR LOG #4 FLAT SPOTS FOR LOG #4
Figure 3. Locations of Flat Spots for Log #4
LOG #4: Place Log #4 into position by setting the left end of Log #4 into the flat spot on Log #2 and then resting the right
end, or nose, of Log #4 on the flat spot on Log #1. Figure 3 shows locations of flat spots. Figure 4 shows Log #4 installed.
Heatilator • NDV30-IFT, NDV33-IFT, NDV36-IFT, NDV36-IFT-NVR, NDV42-IFT Installation Manual • 2620-980 Rev. C • 8/20
SRV2381-070
30
SRV2380-070
SRV2380-071
SRV2380-072
SRV2380-073
SRV2380-074
SRV2380-075
1 1
3 3
LOG PLACEMENT INSTRUCTIONS
SRV2382-070
33
SRV2381-070
SRV2380-071
SRV2381-072
SRV2381-073
SRV2380-074
SRV2380-075
FASTENERS-LOG #2 FASTENERS-LOG #2
Figure 2. Log Fastener Locations on Base Pan
2 2
Figure 4. Log #4 in Position
SRV2383-070
36
SRV2382-070
SRV2382-071
SRV2381-072
SRV2381-073
SRV2382-074
SRV2380-075
FASTENERS-LOG #1 FASTENERS-LOG #1
FASTENERS-LOG #3 FASTENERS-LOG #3
4 4
42
SRV2383-070
SRV2383-071
SRV2383-072
SRV2383-073
SRV2382-074
SRV2383-075
1 1
55