Heatilator NDV30-IFT Installation Manual page 56

LOG PIN LOG PIN
Figure 5. Log Pin Location
Log #5: Place Log #5 into position. The forked end of Log #5 is positioned toward the front of the appliance, with the two
slots on the back side resting on the bent lip of the hearth pan. See Figure 6. Slide Log #5 toward the right until it contacts
the log pin as shown in Figure 6.
4 4
2 2
Figure 7. Log Set Installed
Heatilator • NDV30-IFT, NDV33-IFT, NDV36-IFT, NDV36-IFT-NVR, NDV42-IFT Installation Manual • 2620-980 Rev. C • 8/20
56
1 1
3 3
5 5
BENT LIP BENT LIP
Figure 6. Log #5 in Position
2382-935