Song Control Section [Song] - Yamaha Clavinova CVP-103 Owner's Manual

Use the PAGE [<] and [>] buttons to call up the SONG PLAY
[LIST] display (display page 3), to view the entire list of the song names
in the disk. The desired song can be selected easily by using the data dial
or the [–] and [+] buttons. Up to eight song titles are shown in the dis-
play at a time. If more songs are on the disk, the next eight titles will
appear when you scroll past the last title shown in the display.
C Start and stop playback.
Start playback of the selected song by pressing the [PLAY/STOP]
button.
Playback of the selected song starts. Unless ALL or RANDOM has
been selected, the selected song will play through to the end, then
playback will stop automatically. The current measure number and
tempo will be shown in the display during playback.
You can also start playback of the selected song by pressing the
[START/STOP] button.
Press the panel [PLAY/STOP] button to stop playback.
Song playback stops.
You can also stop playback by pressing the [START/STOP] button.
To exit the Song Play mode, press [SONG] or [EXIT]. The lamp
turns off and the previous display appears.
............................................................................
SONG CONTROL
PLAY/
SONG STOP REC
Song Playback
When nothing appears in the song
name location...
This indicates that there is no song data
for this song number.
Repeat Playback from a Specific Song
If you first select ALL in the SONG PLAY
[MAIN] display, and then select a song in
the SONG PLAY [LIST] display (display
page 3), all songs will be repeatedly
played back starting from the selected
song.
Repeat Playback of a Single Song
If you select a song in the SONG PLAY
[MAIN] display or in the SONG PLAY
[LIST] display (display page 3), and then
select 1 SONG in the SONG PLAY [RE-
PEAT] display (display page 4), only the
selected song will be played back repeat-
edly until stopped.
Voice Selection During Playback
The voice you play from the keyboard
can be changed during song playback by
selecting a voice in the normal way (page
29). The voices of the 1/RIGHT and 2/
LEFT parts being played back can be
changed in the SONG PLAY [L&R
VOICE] display (page 98).
Please note that the song may not start
immediately after you press [PLAY/
STOP].
Turning off the Keyboard Guide Lamp
The keyboard guide lamps corresponding
to the notes being played by the 1/RIGHT
and 2/LEFT parts will light in real time.
These guide lamps can be turned off in
the SONG PLAY [GUIDE MODE] display
(display page 5). (See page 109.)
Turning Off the Lyric Display
Lyrics are shown in the display when
playing back software which contains
lyric data. If you want to stop the lyrics
from appearing, you can disable this
function in page 5 of the SONG PLAY
[GUIDE MODE] display.
Using the Pedal to Start/Stop Playback
When you set the Left Pedal Function to
START/STOP in the FUNCTION
[PEDAL] display (display page 3), the left
pedal will function like the [START/
STOP] button. (See page 138.)
CVP-103
95