Pedal; Function [Pedal] Display - Yamaha Clavinova CVP-103 Owner's Manual

Pedal

FUNCTION [PEDAL] Display — page 3
Left Pedal & Glide Range
This function conveniently lets you set the left pedal to control one of
various functions.
LEFT PEDAL Settings
Setting
SOFT
START/STOP
HARMONY
REGISTRATION
REG.FREEZE
ENDING/RIT
BREAK
BREAK FIL
BASS HOLD
FADE IN/OUT
EFFECT VARI
GLIDE UP S
GLIDE UP M
GLIDE UP F
GLIDE DOWN S
GLIDE DOWN M
GLIDE DOWN F
138
CVP-103
...........................................................................
Description
The left pedal functions as the soft pedal (basic setting). (See
page 40.)
The left pedal functions as the [START/STOP] button. (See page
52.)
When the Harmony function is set to on, Harmony is applied
only while the left pedal is held down. (See page 69.)
The panel settings registered to the next Registration number
are recalled each time the left pedal is pressed. (See page 91.)
The left pedal switches the Registration Freeze function on and
off; that is, it performs the same function as the FREEZE button
in the REGISTRATION [FREEZE] display (page 91).
The left pedal functions as the [ENDING] button. You can have
the song end ritardando (slow down gradually) by pressing the
left pedal twice in succession. (See page 56.)
Pressing the left pedal during style playback produces a break
in the accompaniment and rhythm for as long as the pedal is
held. When the pedal is released, normal playback resumes
from the next measure. If you press the left pedal a second
time within one measure, normal playback resumes immedi-
ately.
Pressing the left pedal during style playback causes the
Clavinova to play a special "break fill-in" pattern. This pattern is
different from the fill-in patterns produced by the Auto Fill func-
tion. (See page 51.)
While the left pedal is pressed, the bass note played by the
Auto Accompaniment will be held even if the chord is changed.
This function does not work when FULL KEYBOARD is se-
lected as the accompaniment mode (page 61).
The left pedal performs the function same as the [FADE IN/
OUT] button. (See pages 55 and 56.)
This function switches the effect variation on or off; that is, it
performs the same effect as the VARIATION button in the
EFFECT display (page 47).
Pressing the left pedal causes the pitch to rise an amount
specified by the GLIDE RANGE function. When the pedal is
released, the pitch glides smoothly back to normal at one of
three speeds (slow, medium or fast, depending on the se-
lected setting).
Pressing the left pedal causes the pitch to drop an amount
specified by the GLIDE RANGE function. When the pedal is
released, the pitch glides smoothly back to normal at one of
three speeds (slow, medium or fast, depending on the se-
lected setting).
LEFT PEDAL
• Settings: See table at left.
• Basic setting: SOFT
If the left pedal is set to REGISTRATION,
the setting of the left pedal function in
Registration memory is not recalled.
GLIDE RANGE
• Settings: 1 — 12 (semitones)
• Basic setting: 1