Function [Backup 2] Display - Yamaha Clavinova CVP-103 Owner's Manual

FUNCTION [BACKUP 2] Display — page 14
Recall
................................................................................................................................
This function can be used to recall the initial factory settings (basic
settings) for a group of parameters, or for all parameters at once.
Press the or buttons or use the data dial or [–] and [+] buttons to
select the group you want to recall, then press the START button.
An "Are you sure?" message will be displayed. Press the YES
button to recall, or NO to cancel.
The following parameter groups of the Clavinova can be recalled.
Group
VOICE SETTING
REVERB/EFFECT
TUNE
PEDAL
ACMP SETTING
SONG SETTING
REGISTRATION
MIDI SETTING
ALL
Refer to page 13 in the Reference Booklet for a list of the specific
parameters in each group.
Description
Voice-related settings
Reverb, chorus, and effect settings
Master tuning, micro tuning, scale tuning
Pedal function settings
Auto Accompaniment-related settings
Settings related to the Song mode
Registration data, Freeze function settings
MIDI function settings
All of the above settings
Backup
Permanent Settings
The factory settings of the following
parameters are not recalled:
• Help language
• Song volume
• Backup ON/OFF
However, these and all other settings can
be reset to the initial factory values by
turning the power on while holding down
the rightmost key on the keyboard (C7).
When this is done, the "Back up data
erased and replaced by factory data"
message appears to indicate that all
backed up data has been erased and the
factory settings have been recalled. After
this message is displayed for a few sec-
onds, the main display will appear.
CVP-103
153