Recalling The Registered Panel Settings - Yamaha Clavinova CVP-103 Owner's Manual

Using Registrations
C Register the panel setup.
While holding down the [REGISTRATION] button, press one of the
buttons labeled [1] through [4] under REGISTRATION/ONE TOUCH
SETTING corresponding to the registration memory where you want to
save the setup.
1
The number of the selected registration memory appears next to
the bank name in the upper left corner of the main display. The
panel settings that were previously stored in the selected registra-
tion are cleared and replaced by the new settings.
Registration number

Recalling the Registered Panel Settings

Z Press the [REGISTRATION] button.
1
The [REGISTRATION] lamp lights.
X Select a bank.
Use the [BANK +] and [BANK –] buttons to select the bank that
contains the desired registration.
1
The selected bank is displayed in the upper left corner of the main
display.
C Select a registration.
Press one of the buttons labeled [1] through [4] under REGISTRA-
TION/ONE TOUCH SETTING corresponding to the registration
memory you want to recall.
90
CVP-103
..........................................................................
REGISTRATION/ONE TOUCH SETTING
2 3 4
BANK
REGISTRATION/ONE TOUCH SETTING
2 3 4
BANK
.......................................................................................................
REGISTRATION/ONE TOUCH SETTING
2 3 4
BANK
REGIST- ONE TOUCH
RATION SETTING
BANK
.............................................
REGIST- ONE TOUCH
RATION SETTING
BANK
REGIST- ONE TOUCH
RATION SETTING
BANK
Registration Memory
• Range: 1 — 4 (each bank)
• Basic setting: None
• Pre-programmed settings are initially
stored in all registration memories
when the Clavinova's power is first
turned on.
• By default, the registration settings are
preserved even when the Clavinova's
power is turned off (see page 152).
You 5can also save individual registra-
tions (or complete sets of 20 registra-
tions) to floppy disk for future recall
(see page 139).