Changing The Keyboard Settings For The Second Voice - Yamaha Clavinova CVP-103 Owner's Manual

Playing Two Voices Simultaneously — Dual Mode

Changing the Keyboard Settings for the Second Voice

You can use the settings in the KEYBOARD [RIGHT2] display page
to change the volume, octave, pan and detune of the voice selected using
the RIGHT2 VOICE function.
Displaying the Second Voice Keyboard Settings
Press [DIRECT ACCESS], then [DUAL].
DIRECT ACCESS
The KEYBOARD [RIGHT2] display appears.
Setting the Volume of the Second Voice
You can use the VOLUME function in the KEYBOARD [RIGHT2]
page to change the volume of the second voice.
Z Press the VOLUME button.
The VOLUME function is highlighted.
X Adjust the volume of the second voice.
Use the data dial or [–] and [+] buttons to change the volume, or hold
down the VOLUME button to increase the volume.
Press the [–] and [+] buttons simultaneously to restore the basic setting.
Setting the Octave of the Second Voice
The OCTAVE function in the KEYBOARD [RIGHT2] display lets
you adjust the pitch of the second voice up or down by one or two oc-
taves. Press the OCTAVE button.
The value changes each time you press the button.
34
CVP-103
VOICE
NTHE- STRINGS/
ZER ORGAN CHOIR DUAL
PER-
ENSEMBLE XG SPLIT
SSION
The settings you make in this page affect
any voices you select using the RIGHT2
VOICE function. Different settings cannot
be made for each voice.
............
If the RIGHT2 VOICE function is selected
in the main display, you can also display
the KEYBOARD [RIGHT2] page by
pressing [DIRECT ACCESS] followed by
REVERB
any one of the VOICE buttons.
EFFECT
You can switch between the KEYBOARD
[RIGHT2] page and the [RIGHT1] (page
31) or [LEFT] (page 37) displays using
the PAGE [ < ] and [ > ] buttons.
..................................
To adjust the overall keyboard volume,
use the KBD VOL function in the main
display (page 23) instead.
VOLUME
• Range: 0 — 127
• Basic setting: 127
OCTAVE
• Settings: –2 (2 octaves lower)
....................................
• Basic setting: 0
Some voices have octave settings that
are selected automatically when the
voice is selected. (Such settings are not
displayed by the OCTAVE function.) You
can prevent the octave setting from
changing when a voice is selected by
setting the VOICE SETTING function
(page 137) to MANUAL.
–1 (1 octave lower)
0 (no octave shift)
+1 (1 octave higher)
+2 (2 octaves higher)