Yamaha Clavinova CVP-103 Owner's Manual page 140

Disk
X Select the file operation.
Use the second LCD button from the right to select the desired file opera-
tion: LOAD, SAVE, DELETE or NAME.
C Press the START button.
The file operation begins.
The subsequent steps for each file operation depend on the operation
you've selected. Refer to the corresponding instructions for each opera-
tion below.
LOAD
.........................................................................................................................................
When you select LOAD, the Load function display will appear. The origi-
nal internal data will be replaced when you execute the Load operation. Be
sure to save all important data to disk (see below) before using the Load op-
eration.
First, select the desired file to be loaded. Press either of the two leftmost
LCD buttons to select the file, then press the OK button.
An "Are you sure?" message is displayed. Press the YES button to
load the selected file, or the NO button to abort the Load operation.
SAVE
.........................................................................................................................................
When you select SAVE, the name entry function display for the file to be
saved will appear.
Press the > button to move the underline cursor, and select the character
position of the file name. (File names can contain up to twelve characters.)
Use the data dial or [–] and [+] buttons to highlight the characters to be
input.
140
CVP-103
File operations cannot be performed
while the [SONG] lamp is lit. Exit the
Song mode before attempting to
perform a file function.