Function [Midi 4] Display - Yamaha Clavinova CVP-103 Owner's Manual

MIDI
Z Select the channel.
Use the CHANNEL < and > LCD buttons to select the number of
the channel you want to enable or disable.
An underline cursor is displayed below the selected channel
number.
X Press the rightmost LCD button.
When the selected channel is enabled, ON is highlighted and the
channel number is enclosed in a solid box. When it is disabled,
OFF is highlighted, and the channel number is displayed without a
surrounding box.
FUNCTION [MIDI 4] Display — page 12
MIDI Transpose
The MIDI Transpose function determines whether the Transpose set-
ting in the FUNCTION [KEYBOARD 1] display (page 136) will affect
the MIDI data received by the Clavinova.
The Clavinova will normally transpose the data it receives. Press the
MIDI TRANSPOSE button to switch this function on or off.
Send Channel (Accompaniment/Harmony)
When the ACMP&RHY function is set to 9—16ch, the performance
data for the rhythm and accompaniment parts is transmitted via the MIDI
[OUT] terminal over MIDI channels 9 through 16.
If the HARMONY function is set to 6–8ch, the notes added by the
harmony types listed below are transmitted via the MIDI [OUT] terminal
over MIDI channels 6 through 8.
150
CVP-103
......................................................................................................
MIDI TRANSPOSE
• Settings: ON (enabled),
• Basic setting: ON
............................
SEND CH (ACMP&RHY)
• Settings: OFF (not transmitted),
• Basic setting: OFF
SEND CH (HARMONY)
• Settings: OFF (not transmitted),
• Basic setting: OFF
OFF (disabled)
9–16ch (transmitted)
6–8ch (transmitted)