Playing Back The Recorded Performance - Yamaha Clavinova CVP-401 Owner's Manual

Playing Back the Recorded Performance

Play back the recorded performance.
1
Call up the USB AUDIO RECORDER display.
[USB] → [E] (USB AUDIO RECORDER).
2
Press the [7 π
saved to the connected USB storage device.
The file recorded is selected in step 1-7 (page 60). For information about the operation method to change the
name of the displayed file or to delete a file, see the section "File/Folder Operations in the File Selection Dis-
play" on page 69. However, the operation that copies/moves file/folder to the User tab cannot be done here.
3
Press one of the [A]-[J] buttons corresponding to the file you want to listen to, then
press the [8 †
The song is played back from the beginning, and the display indicates the auditioning process. This display
closes automatically when auditioning is stopped. Press the [G] (CANCEL) or [EXIT] button to stop audition-
ing.
CAUTION
Avoid frequently connecting/disconnecting the USB storage device, or turning the power on/off too often. Doing so
may corrupt the USB storage device data or the auditioning data.
n Audio recording is processed internally so that playback volume will be appropriate when played on a computer. There-
fore, the playback sound might be distorted if you record at too high a volume. In this case, lower and adjust the volume
of each part with Volume Balance display (page 40) and the Mixing Console (page 87), etc., and try recording again.
4
Press the [EXIT] button to return to the USB AUDIO RECORDER display shown in step 4
of "Recording Your Performance as Audio" above.
62 CVP-405/403/401 Owner's Manual
† ]/[8 π † ] (AUDITION) button to display the audio files (WAV data)
π † π π † † π † π π † †
† ] (AUDITION) button.
† †