Yamaha Clavinova CVP-401 Owner's Manual page 188

Using the Footswitch or Foot Controller ([AUX PEDAL] jack)
Details on the pedal functions are listed here. For functions indicated with "
operation cannot be done with a footswitch.
Assignable Pedal Functions
VOLUME*
SUSTAIN
SOSTENUTO
SOFT
GLIDE
PORTAMENTO
PITCH BEND*
MOD/S.ART1* (CVP-405)
MODULATION (CVP-403/401)
MOD/S.ART2 (ALT) (CVP-405)
S.ART SW (CVP-405)
DSP VARIATION
VIBE ROTOR ON/OFF
HARMONY/ECHO
VOCAL HARMONY (CVP-405/403)
TALK (CVP-405/403)
SCORE PAGE+
SCORE PAGE–
LYRICS PAGE+
LYRICS PAGE–
TEXT PAGE+ (CVP-405)
TEXT PAGE– (CVP-405)
SONG PLAY/PAUSE
STYLE START/STOP
TAP TEMPO
SYNCHRO START
SYNCHRO STOP
188 CVP-405/403/401 Owner's Manual
Allows you to use a foot controller to control the volume. This function is available only
for the pedal connected to the instrument's AUX PEDAL jack.
Allows you to use a pedal to control the sustain. When you press and hold the pedal,
all notes played on the keyboard have a longer sustain. Releasing the pedal immedi-
ately stops (damps) any sustained notes.
Allows you to use the pedal as a sostenuto pedal. In other words, if you play a note or
chord on the keyboard and press the pedal while holding the note(s), the notes will sus-
tain as long as the pedal is held. However, all subsequent notes will not sustain. This
makes it possible to sustain a chord, for example, while other notes are played staccato.
Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the vol-
ume and changes the timbre of the notes you play. This is effective only for certain
appropriate Voices.
When the pedal is pressed, the pitch changes, and then returns to normal pitch when
the pedal is released.
The portamento effect (a smooth slide between notes) can be produced while the pedal
is pressed. Portamento is produced when notes are played legato style (i.e., a note is
played while the preceding note is still held). Portamento Time can also be adjusted
from the Mixing Console (page 89). This function does not affect certain Natural Voices,
which would not sound appropriately with this function.
Allows you to bend the pitch of notes up or down by using the pedal.
Applies a vibrato effect to notes played on the keyboard. Moreover, various effects can
be added to the S. Articulation Voice (CVP-405) (page 79). The effect becomes deeper
when pressing down the foot controller. You can turn this function on/off for each key-
board part on this display.
As a variation on MOD/S.ART1, the effects (waveform) can be switched on/off by the
pedal/footswitch. The effects (waveform) is alternately turned on and off each time the
pedal/footswitch is pressed. You can turn this function on/off for each keyboard part on
this display.
When you use a S. Articulation voice that has an effect assigned to the pedal/
footswitch, you can enable the effect by pressing the pedal/footswitch. You can turn this
function on/off for each keyboard part on this display.
Switches Voice Effect DSP VARIATION on and off.
Switches the VIBRATE SW parameter on and off when the VIBE VIBRATE effect type is
selected.
Switches the HARMONY/ECHO Voice Effect on and off.
Switches the Vocal Harmony function on and off.
Switches the MIC SETTING Talk function on and off.
While the song is stopped, you can turn to the next score page.
While the song is stopped, you can turn to the previous score page.
While the song is stopped, you can turn to the next lyrics page.
While the song is stopped, you can return to the last lyrics page.
You can turn to the next text page.
You can return to the last text page.
Same as the SONG [PLAY/PAUSE] button.
Same as the STYLE CONTROL [START/STOP] button.
Same as the [TAP TEMPO] button.
Same as the [SYNC START] button.
Same as the [SYNC STOP] button.
", use only the foot controller; proper
*