Yamaha Clavinova CVP-401 Owner's Manual page 189

INTRO1–3
MAIN A–D
FILL DOWN
FILL SELF
FILL BREAK
FILL UP
ENDING1–3
FADE IN/OUT
FINGERED/FING ON BASS
BASS HOLD
PERCUSSION
DUAL ON/OFF
SPLIT ON/OFF
OTS+
OTS–
n
The Sostenuto and Portament functions will not affect the Organ Flute Voices, even they have been assigned to the Foot Pedals.
Adjustable Parameters for Each Function
The parameters below correspond to buttons [2 π† ]–[8 π† ], and their availability depends on the selected control
type. For example, if SUSTAIN is selected as the type, the parameters "HALF PEDAL POINT," "RIGHT 1," "RIGHT 2"
and "LEFT" automatically appear in the display.
SONG, STYLE, MIC (CVP-405/403),
LEFT, RIGHT1, RIGHT2
HALF PEDAL POINT* (CVP-405/403)
DEPTH
UP/DOWN
RANGE
ON SPEED
OFF SPEED
KIT
PERCUSSION
Using the Footswitch or Foot Controller ([AUX PEDAL] jack)
Same as the [INTRO I–III] buttons.
Same as the [MAIN VARIATION A–D] buttons.
Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate left.
Plays a fill-in.
Plays a break.
Plays a fill-in, which is automatically followed by the Main section of the button on the
immediate right.
Same as the [ENDING/rit. I–III] buttons.
Switches Fade In/Fade Out function on and off.
The pedal alternately switches between the Fingered and On Bass modes (page 103).
While the pedal is pressed, the Accompaniment Style bass note will be held even if the
chord is changed during Style playback. If the fingering is set to "AI FULL KEYBOARD,"
the function does not work.
The pedal plays a percussion instrument selected by the [4 π† ]–[8 π† ] buttons. You
can use the keyboard to select the desired percussion instrument.
Same as the PART ON/OFF [DUAL (RIGHT2)] button.
Same as the PART ON/OFF [SPLIT (LEFT)] button.
Calls up the next One Touch Setting.
Calls up the previous One Touch Setting.
These specify the part(s) that will be affected by the pedal.
You can specify how far down you should press on the pedal until the damper or soft
effect (page 188) starts working.
Determines the depth of the pedal effect.
When GLIDE or PITCH BEND is selected, this determines whether the pitch change is
raised or lowered.
When GLIDE or PITCH BEND is selected, this determines the range of the pitch
change, in semitones. Linked to the Mixing Console → Pitch Bend Range (page 89) set-
ting.
When GLIDE is selected, this determines the speed of the pitch change, when the pedal
is pressed.
When GLIDE is selected, this determines the speed of the pitch change, when the pedal
is released.
When PERCUSSION is assigned to the pedal, all available drum kits are shown here,
letting you select the particular drum kit used for the pedal.
When PERCUSSION is assigned to the pedal, all sounds of the selected drum kit (in KIT
above) are shown here. This determines the particular instrument sound assigned to the
pedal.
CVP-405/403/401 Owner's Manual 189