Recording In Dual Or Split Mode - Yamaha Clavinova CLP-270 Owner's Manual

Recording Your Performance
Adjusting the volume balance between playback and your performance
[SONG BALANCE]
While recording multiple parts one by one, you can adjust the volume balance between the playback of the
recorded parts and your current performance.
Procedure
1.
Move the [SONG BALANCE] slider to the left or right
to make adjustments.
The song playback
volume will be lower.

Recording in Dual or Split mode

When you record in Dual or Split mode, the Clavinova records each voice onto a separate part. The following
table shows how parts are assigned to each voice.
CAUTION
When you record multiple parts one by one, or when you record new data over an existing song (see page 40), the
existing data will be erased. Proceed with caution.
In the following example, RIGHT, LEFT, and EXTRA PARTS n have been selected for recording.
Parts assigned for
recording
MAIN
(voice 1)
LEFT
Parts
(voice 1)
used for
record-
MAIN
ing
(voice 2)
LEFT
(voice 2)
Note: Part n = Part 3 – Part 16
If "n+1," "n+2," and "n+3" exceed 16, Parts 1, 2, and 3 are used.
TIP
Switching between Dual and Split mode in a song is not recorded.
42
CLP-280/270 Owner's Manual
SONG KEYBOARD
SONG BALANCE
Dual
RIGHT LEFT EXTRA
PART n
Part 1 Part 2 Part n
–
Part 3 Part 4 Part n+2
–
Your playing volume
will be lower.
Split
RIGHT LEFT EXTRA
PART n
Part 1 Part n
Part 2 Part n+1
–
–
TIP
Some commercially-available
music data contains extremely
high volumes. When using such
data, please adjust the song
balance.
Split+Dual
RIGHT LEFT EXTRA
PART n
Part 1 Part n
Part 2 Part n+1
Part 3 Part n+2
Part 4 Part n+3