Yamaha Clavinova CLP-270 Owner's Manual page 88

Other settings [FUNCTION]
Setting the depth of string resonance
[StringResonanceDepth]
This parameter is effective on the voices, such as
"Grand Piano 1."
See the procedure on page 69.
A
StringResonanceDepth
C
Setting range:
Off, 1 - 10
Setting the depth of sustain sampling
for the damper pedal
[SustainSamplingDepth]
This parameter is effective only on the voice group
"GRANDPIANO1."
See the procedure on page 69.
A
SustainSamplingDepth
C
Setting range:
Off, 1 - 10
Specifying the volume of the key-off
sound [KeyOffSamplingDepth]
You can adjust the volume of the key-off sound (the
subtle sound that occurs when you release a key)
This is effective on the voice groups "Grand
Piano1," "Harpsichord," and "E.Clavichord" and
on the voice "E.Piano2."
See the procedure on page 69.
A
KeyOffSamplingDepth
C
Setting range:
Off, 1 - 10
88
CLP-280/270 Owner's Manual
Setting the range of pitch bend
[PitchBendRange]
This specifies the amount of change that can be
produced by the pitch bend function which
smoothly varies the pitch.
• This setting applies only to the manually-played
B
sound.
NO YES • This setting can be made in semitone steps.
5
• You can set the pedal function (page 85) to spec-
D
ify whether the pitch will be raised or lowered.
See the procedure on page 69.
Setting range:
-
0 +12 (Pressing the pedal will raise/lower the pitch by
12 semitones [1 octave])
Normal setting:
–2
B
NO YES
5
Switching the speaker on/off
D
[Speaker]
This setting lets you switch the speaker on/off.
See the procedure on page 69.
Normal (HeadphoneSW)
On
Off
B
NO YES
5
D
A
PitchBendRange
C
A
Speaker
Normal(HeadphoneSW)
C
The speaker will sound only if headphones
are not connected.
The speaker will always sound.
The speaker will not sound.
B
NO YES
2
D
B
NO YES
D