Yamaha Clavinova CLP-270 Owner's Manual page 76

Detailed settings for the voices [VOICE SETTING]
TIP
In Dual mode, parameters with the "*" mark are set for Voice 1
and Voice 2 individually.
TIP
Parameter names enclosed in parentheses ( ) are displayed in
Dual mode.
Setting the octave [Octave]*
The pitch of a note can be shifted upward or down-
ward in steps of an octave.
See the procedure on page 69.
A
Main
Octave
C
In Dual mode:
A
MainxLayer
Octave(GrndPno1)
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
–2 (two octaves lower) - 0 (no pitch shift) - +2 (two
octaves higher)
Setting the volume level [Volume]*
You can set the volume level for each voice part.
See the procedure on page 69.
A
Main
Volume
C
In Dual mode:
A
MainxLayer
Volume(GrndPno1)
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 - 127
76
CLP-280/270 Owner's Manual
B
Set?-->
NO YES
0
D
B
Set?-->
NO YES
0
D
B
Set?-->
NO YES
100
D
B
Set?-->
NO YES
100
D
Setting the position of right and left
channels [Pan]*
You can specify the position in the stereo image
from which you hear the sound.
See the procedure on page 69.
A
Main
Pan
C
In Dual mode:
A
MainxLayer
Pan(GrndPno1)
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
L64 (hard left) - C (center) - R63 (hard right)
Make fine adjustments to the pitch
(only in Dual mode) [Detune]
The pitch of the two sounds selected in Dual mode
can be "skewed" slightly away from each other.
See the procedure on page 69.
A
MainxLayer
Detune
C
Setting range:
–20 - +20 (Positive (+) settings will raise the pitch of the
first sound and lower the pitch of the second sound.
Negative (–) settings will do the opposite.)
B
Set?-->
NO YES
C
D
B
Set?-->
NO YES
C
D
B
Set?-->
NO YES
+ 3
D