Yamaha Clavinova CLP-270 Owner's Manual page 110

CLP-280/270: Keyboard Stand Assembly
2.
Attach B.
2-1
Insert B between E and F as shown in the illus-
tration.
2-2
Align and attach B to the front side of D, E and
F.
2-3
Secure B using the 4 x 14mm thin screws.
* Insert two screws into the smaller holes on the
brackets.
2-4
Temporarily secure with 4 x 14mm thin screws.
* Insert four screws into the smaller holes on the
brackets.
2-4
2-5
If you assembled the stand on an unlevel sur-
face, place the assemble stand on a level sur-
face.
110
CLP-280/270 Owner's Manual
2-3
3.
Mount A.
3-1
Assemble the side panel protection (card-
board) pad, as shown in the illustration. Then,
remove the two backing papers from the adhe-
sive tape on the protection pad.
3-2
Cover the top of E and F with the side panel
protection pad. Then, fix the protection pad
with the adhesive tape.