Yamaha Clavinova CLP-270 Owner's Manual page 86

Other settings [FUNCTION]
Setting the auxiliary pedal function
[AuxPedalFunc]
You can assign a function to the pedal connected to
the Clavinova's AUX PEDAL jack.
See the procedure on page 69.
A
AuxPedalFunc
C
Setting range:
Same as "Right pedal function assignment" (page 85).
Normal setting:
Expression
TIP
YAMAHA FC7 foot controller
This foot controller is suitable for controlling Expression, Sus-
tainCont, or PitchBend Up/Down.
YAMAHA FC4 foot switch
YAMAHA FC5 foot switch
These foot switches are suitable for controlling Sustain, Soste-
nuto, Soft, RotarySpeed, or VibeRotor.
Turning the right pedal function on/
off [RPedalOnOff]
This turns the right pedal function on or off for the
relevant voice part. In other words, you can select
the desired voice part (Main, MainLayer, Left, Left-
Layer) and determine whether the right pedal
function (set on page 85) will affect that part or
not.
See the procedure on page 69.
A
RPedalOnOff
Main
C
Select the voice part for which
the right pedal on/off setting is
to be changed.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
86
CLP-280/270 Owner's Manual
B
Set?-->
NO YES
Expression
D
B
Set?-->
NO YES
On
D
Select on or off.
Turning the center pedal function
on/off [CPedalOnOff]
This turns the center pedal function on or off for
the relevant voice part. In other words, you can
select the desired voice part (Main, MainLayer,
Left, LeftLayer) and determine whether the center
pedal function (set on page 85) will affect that part
or not.
See the procedure on page 69.
A
CPedalOnOff
Main
C
Select the voice part for which
the center pedal on/off setting
is to be changed.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
Turning the left pedal function on/off
[LPedalOnOff]
This turns the left pedal function on or off for the
relevant voice part. In other words, you can select
the desired voice part (Main, MainLayer, Left, Left-
Layer) and determine whether the left pedal func-
tion (set on page 85) will affect that part or not.
See the procedure on page 69.
A
LPedalOnOff
Main
C
Select the voice part for which
the left pedal on/off setting is
to be changed.
Setting for:
Main, MLayer (MainLayer), Left, LLayer (LeftLayer)
Setting range:
On/Off
Normal Setting:
Different for each voice.
B
Set?-->
NO YES
On
D
Select on or off.
B
Set?-->
NO YES
On
D
Select on or off.