Gigaset N870 IP Pro Site Planning And Measurement Manual page 47

Activating/deactivating metering mode
The handset is in metering mode when it is activated.
Exiting metering mode
You exit metering mode by resetting the handset:
v
£ £
System
Reactivating metering mode via the service menu
If you have exited metering mode, you can reactivate it via the service menu. Proceed as follows:
a
Press and hold the off key to deactivate the handset.
4M
a
Press
Then press and hold the on key
The handset is now in Service mode.
~
Enter the five-digit service PIN. On delivery this is 76200.
The service menu is opened.
Service
Metering Mode
Working Time
Apprv. Narr.Band
Apprv. Wide Band
SAR
Back
£
Handset Reset
4
, and
s
§Change§
³
Once you activate metering mode, the RSSI measurement
menu is opened.
´
Here you can change the settings for the unit of measure
and the measurement interval.
´
Change
Working with the Gigaset N720 SPK PRO
M
a
at the same time and hold them down.
.
Select the Metering Mode entry with
the navigation key.
Press the display key to activate the entry.
47