Gigaset N870 IP Pro Site Planning And Measurement Manual page 31

Measuring the cell of a base station
¤
Temporarily secure the measuring base station in the position in which the base station
is to be installed.
¤
Establish a telephone connection between the two measuring handsets or activate the
continuous test tone of the measuring base station (
¤
Move away from the base station with the handset, observing the display and the signal in
the earpiece, until the limit value of –65 dBm is displayed or a wireless transmission boundary
is reached (e.g., lift, exterior wall). Transfer this point to your plan and enter the value in the
measurement log.
¤
Use this method to determine the border line around the base station. The theoretical ideal
case of a ring-shaped transmission is considerably altered in reality by walls (depending on
the construction material) and metal furnishings.
¤
Check the voice quality in the limit areas using the connection to the second measuring
handset or the measuring tone of the base station.
¤
Enter deviations in the reception signal measurement of the voice quality in the layout plan
or the measurement log.
B
A
C
1
WC/
store
Stairs
Taking measurements
¢
P. 46).
2
D
Computer
E
9
31