Gigaset N870 IP Pro Site Planning And Measurement Manual page 40

Working with the Gigaset N720 SPK PRO
Charging the batteries
The measuring base station is connected
to the power supply by means of
a cable §§1§§.
The charging socket is located behind
opening §§2§§, while there is a switch for
switching between "Operation" and
"Charge" behind opening §§3§§.
¤
Move the switch to the charging
position by sliding it towards
the charging socket.
¤
Plug the battery charger into a mains
socket §§4§§.
You may need to attach the appropri-
ate plug-in module first.
¤
Plug the battery charger plug into
the charging socket on the back
of the base carrier §§5§§.
¤
Charge the batteries until the charger's
charging indicator lights up.
¤
When the batteries are charged,
unplug the charger plug from the
charging socket and return the
switch to the "Operation" position.
The measuring station has sufficient power when the LED
on the front is illuminated.
To save energy, move the switch to "Charge" when you
do not need the device.
40
3
1
5
2
4