Yamaha AW 16G Owner's Manual page 184

Appendix
■ TREMOLO
Tremolo effect.
Parameter Range
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
WAVE Sine, Tri, Square
LSH F 21.2–8.00 k [Hz]
LSH G –12 to +12 [dB]
EQ F 100–8.00 k [Hz]
EQ G –12 to +12 [dB]
EQ Q 10–0.10
HSH F 50.0–16.0 k [Hz]
HSH G –12 to +12 [dB]
MIX BAL. 0–100 [%]
■ HQ.PITCH (Effect 2 only)
High-quality pitch shifter.
Parameter Range
PITCH –12 to +12 semitones
FINE –50 to +50 cents
DELAY 0.0–1000.0 ms
FB.GAIN –99 to +99%
MODE 1–10
MIX BAL. 0–100 [%]
■ DUAL PITCH
Twin-voice pitch shifter.
Parameter Range
PITCH 1 –24 to +24 semitones
FINE 1 –50 to +50 cents
PAN 1 L16–1, C, R1–16
DELAY 1 0.0–1000.0 ms
FB.G 1 –99 to +99%
LEVEL 1 –100 to +100%
PITCH 2 –24 to +24 semitones
FINE 2 –50 to +50 cents
PAN 2 L16–1, C, R1–16
DELAY 2 0.0–1000.0 ms
FB.G 2 –99 to +99%
LEVEL 2 –100 to +100%
MODE 1–10
MIX BAL. 0–100 [%]
184
Modulation speed
Modulation depth
Modulation waveform
Low-shelving filter frequency
Low-shelving filter gain
Parametric equalizer center frequency
Parametric equalizer gain
Parametric equalizer band width
High-shelving filter frequency
High-shelving filter gain
Mix balance of the effects and dry sounds
Pitch shift
Pitch shift fine
Delay time
Feedback gain (plus values for normal-phase feedback, minus values for reverse-phase
feedback)
Pitch shift precision
Mix balance of the effects and dry sounds
Channel 1 pitch shift
Channel 1 pitch shift fine
Channel 1 panpot
Channel 1 delay time
Channel 1 feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Channel 1 level (plus values for normal phase, minus values for reverse phase)
Channel 2 pitch shift
Channel 2 pitch shift fine
Channel 2 panpot
Channel 2 delay time
Channel 2 feedback gain (plus values for normal-phase feedback, minus values for
reverse-phase feedback)
Channel 2 level (plus values for normal phase, minus values for reverse phase)
Pitch shift precision
Mix balance of the effects and dry sounds
Description
Description
Description