Ductless mini split system air conditioner / heat pump, uab: cooling only version / uyb: cooling and heating version series flex mount, inverter plus and inverter plus plus models, 18,000-48,000 btu/hr (18 pages)
Page 1
• Output: DC 12V 8W PF > 0.5, Tc < 176 ºF • LED Input: 6.72W • Owner’s Manual Current: 0.56A • Model Number: IKT-UVL32UL-AG Voltage: 12V • Applicable for These Air System Types Floor-Ceiling Wall-Mount ozone ozone FREE DISINFECTION...
Page 2
The Contents of UVC Mini Operation Principles & Technology X-RAYS ULTRAVIOLET VISIBLE LIGHT INFRARED Improves indoor air quality and fights biological contamination inside mini splits. UM-UV UV-C UV-B UV-A UV LED Driver RF Receiver (Optional) RF Emitter (Optional) 280 315 LED UVC Strip UVC Radiation used for disinfection is most effective at a wavelength of 254nm.
Page 3
Air System Preparation Before Installation Introduction to UVC Mini Kits UVC MINI KITS are an innovative application of UV disinfection in Mini Splits and other space-limited systems. 1. Remove the cabinet cover It is normally used to disinfect an air conditioning system, by halting any Disconnect Power Supply bio-growth on fan, coils and other surfaces, and related bad odors.
Page 4
Mounting the UVC LED Strip Install the Light Shield Strip UVC light shield strip is designed by the manufacturer and recommended to be installed with the UV LED strip. It is adhesive with a special material, 1. Determine best location to shield these lights which may be exposed INTO THE ROOM.
Electrical Installation Electrical Installation 3. Tuck the power cable into the line chase 1. Remove the control box cover and on the back of the unit or place it under the control box or other secure location. connect the UV LED Driver power cable with the following: UV LED DRIVER Blue Wire: “L”...
Page 6
Cut-to-length Instruction Bacterial Disinfection Concepts to know for Ductless Mini-Split Systems One UV modular cycle is 10cm, which includes UVC(1)+UVA(4) Prevents bio-growth & related odors on fan, coil and other interior surfaces! Actual Length = air outlet vent length which determines the required actual "L". Closed Elec.