Advertisement
Introduction to UVC Mini Kits
UVC MINI KITS are an innovative application of UV disinfection in Mini Splits
and other space-limited systems.
It is normally used to disinfect an air conditioning system, by halting any
bio-growth on fan, coils and other surfaces, and related bad odors. It helps
substantially to maintain a clean, fresh air conditioner system, improve the
indoor air quality, extends life span, and reduces maintenance cost.
Because space is tight and sufficient exposure of surfaces are required, the
UVC MINI KITS is best installed inside the supply vent with the light shining
onto the blower wheel (which is prone to contain concentrated mold growth).
UVC
Cutaway View of Typical Installation of UVC MINI KITS in Mini Split
CAUTION UV LED LIGHT
Prolonged exposure to direct LED UV light may be harmful to eyes & skin.
Disconnect power before servicing. Indirect exposure (blue glow) is not harmful.
Install LED strip so that the light shines into the air system, not into the room.
IMPORTANT!
Air System Preparation Before Installation
1. Remove the cabinet cover
Disconnect Power Supply
Detach filters
Dismantle the LED display assembly
Open the control box cover
2b. For systems with non-removable
drain pan, remove the louvers and
grills to access.
Disconnect the power supply before you do anything on the installation!
2a. Detach drain pan to access
the area behind it.
3. Unless not required, drill a 2/3 hole
to pass connector cable to the back.
(By the side of the control box)
IMPORTANT!
Advertisement
