Yamaha WK83840 Owner's Manual page 37

Some Parameter Edit displays have just one numeric
parameter, while other may have two or more.
Parameter Edit Display with One Numeric Parameter
1.
Numeric values can be changed by rotating the
dial. Dial rotation produces an immediate,
corresponding change in the selected value.
2.
Press the [ENTER] key to close the Parameter
Edit display after the value(s) have been edited
as required.
Parameter Edit Display with Multiple Numeric
Parameters
1.
Use the cursor keys – [
select the value to be edited.
E ] [ ▲ ] [ ▼ ] [ F ] – to
2.
Rotate the dial to edit the value as required.
3.
Repeat step 1 to select the next value to be
edited, use the dial to edit as required, and
repeat until all values have been edited as
required.
4.
When all values have been edited, press the
[ENTER] key. A confirmation window will
appear: press [ENTER] one more time to
confirm the edits and close the window.
ENTER ENTER
ENTER ENTER
N OTE
You can close the window without changing any values by
pressing the [CANCEL] key rather than the [ENTER] key.
DME64N/DME24N Owner's Manual
Parameter Edit Displays
37