Yamaha WK83840 Owner's Manual page 69

3. MIDI Setup
Specifies basic MIDI operation.
3.1 Host Select
Selects the input/output port to be used for MIDI communication.
3.2 DAW Controller
Specifies the DAW controller type when a DAW control surface is to be used to control the DME64N/24N. When Type 1/
2 is selected, Host Select is automatically set to MIDI.
3.3 MIDI Tx Channel
Specifies the MIDI transmit channel (1 ~ 16).
3.4 MIDI Rx Channel
Specified the MIDI receive channel (1 ~ 16).
3.5 MIDI Tx Switch
Program Change Tx Switch: turns Bank Select MSB, LSB, and Program Change transmission on or off.
Control Change Tx Switch: turns Control Change transmission on or off.
Parameter Change Tx Switch: turns Parameter Change transmission on or off.
3.6 MIDI Rx Switch
Program Change Rx Switch: turns Bank Select MSB, LSB, and Program Change reception on or off.
Control Change Rx Switch: turns Control Change reception on or off.
Parameter Change Rx Switch: turns Parameter Change reception on or off.
3.7 MIDI Omni Switch
Program Change Omni Switch: turns the Bank Select MSB, LSB, and Program Change omni mode on or off.
Control Change Omni Switch: turns the Control Change omni mode on or off.
3.8 MIDI Echo Back Switch
Program Change Echo Back Switch: turns Bank Select MSB, LSB, and Program Change echo back on or off.
Control Change Echo Back Switch: turns Control Change echo back on or off.
Parameter Change Echo Back Switch: turns Parameter Change echo back on or off.
4. MIDI Format
Number Format Notation
Numbers ending with "h" are in hexadecimal format, while numbers ending with "b" are binary format. Characters "A"
through "F" in hexadecimal numbers represent decimal values 10 through 15. Other lowercase characters (usually "n" or "x")
represent any number.
MIDI Format Chart (Rx: receive, Tx: transmit)
Channel Message
System Real-time Message
System Exclusive Message
Command
Control Change (Bnh)
Program Change (Cnn)
ACTIVE SENSING (FEH)
Parameter Change
Rx/Tx Function
Rx/Tx Parameter Change
Rx/Tx Scene Recall
Rx MIDI Cable Check
Rx/Tx Parameter Change
DME64N/DME24N Owner's Manual
MIDI Data Format
69