Installation and Settings
3-3-6 Attachment and removal of termination resistor
■ Attaching a termination resistor
Be sure to attach a termination resistor (obtain separately) to the end SC-HG1-C.
Attach the termination resistor to "DA" and "DB" on the communication connector.
To attach, insert sufficiently into the connection hole while pressing the release button.
Termination resistor
(Obtain separately)
■ Removing the termination resistor
To remove the termination resistor, press the release buttons (x2).
3-12
Release button
Release button
Flat-head screwdriver
Cable
Supports Ver. 1.10
CC-Link dedicated cable
Flat-head screwdriver
WUME-SCHG1C-4