Installation and Settings
3-2-2 Communication unit settings
After changing the settings, be sure to turn the power OFF and then ON.
Follow the procedure below to configure the settings.
1.
Set the station number (1 to 64) with the station number setting switch.
Note: If you set the station number setting switch to 0 or 65 or higher, an error will occur.
2.
Set the communication speed with the communication speed setting switch.
Communication speed setting switch
3.
Set the communication method and number of occupied stations with the mode setting
switch.
When you have completed the mode setting switch settings, attach the switch cover.
3-4
Station number setting switch
SW No.
Mode setting switch
Switch cover
Communication speed
156kbps
0
(Factory default state)
1
625kbps
2
2.5Mbps
3
5Mbps
4
10Mbps
WUME-SCHG1C-4