Table of Contents
Advertisement
2
Product description
About the Schaeffler SmartCheck system
Schaeffler SmartCheck is a vibration monitoring system for permanent frequency-selective monitoring. Other
measurements can be captured, recorded and analysed using two integrated signals and up to three connected
signals. After the analysis, the system can switch outputs and display the status using LEDs depending on user-
defined alarm limits.
Inputs are available, which record additional signals, to allow the device to be integrated into a superordinate
system. These signals can be used as command variables for a dependent signal analysis, e.g. to initiate time or
event-controlled measurement tasks.
The Schaeffler SmartCheck device can be used to cover a wide range of applications; the SmartCheck device can be
configured to meet your own requirements using the integrated web application and Schaeffler SmartWeb
software. Multiple SmartCheck devices can be combined in a network. Regardless of the number of devices, they
can be managed centrally on a PC using the Schaeffler SmartUtility Light software, or optionally using the Schaeffler
SmartUtility software.
With Schaeffler SmartCheck, Schaeffler offers status monitoring that is optimised to suit your requirements.
2.1 Intended use
The Schaeffler SmartCheck device is intended solely for:
·
Capturing and analysing vibration measurement signals
·
Capturing temperature signals
·
Evaluating signals entering the device at its inputs
The Schaeffler SmartCheck device may only be operated within the limitations of use specified in the Technical
7
data
.
Measured-value analyses and changes to settings may only be made using the supplied Schaeffler SmartUtility Light
software, the optional Schaeffler SmartUtility software, the integrated Schaeffler SmartWeb software, or where
possible, on the device itself.
Any other or additional use of the device is deemed to be not intended; the user bears sole risk for such use. The
user is responsible for the intended use of the device. This also includes observing this guide.
6
The SmartCheck device is ready for measurement as soon as the power supply is connected.
To ensure optimum vibration monitoring from the outset, we recommend that you do not
start the SmartCheck device until
·
All connections have been correctly made, and
·
The machine to be monitored is in a normal operating state
Advertisement
Table of Contents
