Connection Configuration: Digital Output Signal - Schaeffler SmartCheck User Manual

Set-up

4.3.4 Connection configuration: Digital output signal

You can supply a digital output signal to a relay or a PLC via the Schaeffler SmartCheck digital output. Details of both
options can be found in the sections below.
Digital output signal to relay
For this option, the SmartCheck device provides a digital open-collector output that can switch a relay against
positive. Our example shows how to switch a 24-V relay against the open collector:
You must also create the digital output using the integrated Schaeffler SmartWeb software. To do this, open the
Configuration > Output configurations field in the SmartWeb software. You can use the Add button to
add a digital output and configure it as follows, for example:
Details of the possible settings can be found in the Schaeffler SmartWeb user documentation.
23