Connection Details - Schaeffler SmartCheck User Manual

4.2 Connection details

Use the M12 connections on the SmartCheck device to connect the inputs and outputs
16
connection and the power supply
·
Connection 1: Input/output socket
·
Connection 2: Ethernet plug
·
Connection 3: Power supply plug
Details on the assignment of the various cables required can be found in the sections below.
Connection 1: Input and output socket
The inputs and outputs of the SmartCheck device can be connected using the top left socket.
The pins are defined as follows:
Pin assignment
Front view of the device
* Colour specifications apply for standard cables from the optional accessories for the Schaeffler SmartCheck device.
Connection 2: Ethernet plug
The Ethernet plug, which you can use to connect the SmartCheck device to your computer and to the
Internet/Intranet, is located at the top right.
16
·
The numbering of the connections corresponds to the numbering specified in the detailed
information for each individual connection. For more information, refer to the Connection
16
details section.
·
The information relating to the colours used for the cable assignments refers to the cables
in the optional accessories
17
:
Cover any M12 connections that are not in use with the plugs supplied. This is the only way
to ensure that the degree of protection is maintained.
No.
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
8
for the Schaeffler SmartCheck device.
Signal
GND inputs
Digital input
Analogue input 1
Analogue input 2
GND outputs
Analogue output
Digital output
Not connected
16
, the PC/Ethernet
Colour*
White
Brown
Green
Yellow
Grey
Pink
Blue
Red